Quarter Sequence Chains Pro
The TradingView indicator that maps every cycle’s quarters as a ribbon and lights the chains: how to read it, set it up and use it on your price chart.
Quarter Sequence Chains Pro is a TradingView indicator that maps the quarters of ten nested time cycles as a ribbon and lights the chains: the moments when three or more neighbouring cycles sit in the same quarter. It runs on the Quarterly Theory clock from the 18:00 New York trading day, so every quarter it draws is known in advance and the ribbon does not repaint.
New to Quarter Sequence? Start with What is Quarter Sequence?
What it shows
Quarter Sequence Chains Pro shows where every cycle is in time at once: one row per cycle and one cell per quarter, in a pane beneath price. The ten cycles run from the Pico, Nano and Micro inside the 90-minute cycle, through the Daily and the Weekly, up to the Monthly, Quarterly, Yearly and Quadrennial.
The indicator reads time, not price. It shows which quarter each cycle is in, when several cycles agree and when the next agreement is due. It never says which way price will go: direction comes from the True Opens, never from the chain.
How to read the ribbon
The ribbon is read row by row: each row is one cycle, and the colour of its cell says which quarter that cycle is in. The four colours are the same on every row, so one glance down a column shows the market’s position on every cycle at that moment.
| Quarter | Colour | Phase |
|---|---|---|
| Q1 | Slate grey | Accumulation |
| Q2 | Red | Manipulation |
| Q3 | Green | Distribution |
| Q4 | Blue | Continuation or Reversal |
The fastest cycle sits on top by default; tick Slowest cycle on top in section 4 to read the ladder the other way up. Cells outside a chain are drawn fainter than the chain’s own cells, and section 5 sets how faint, so a lit chain stands out from the rest of the ribbon.
What the addresses mean
An address is the string of quarter numbers that says where a cell sits inside its parent cycles, read from the slowest cycle on the left to the cell’s own quarter on the right. With the default depth of three, a Micro cell that reads 214 means the Daily is in its Q2, the 90-minute cycle is in its Q1 and the Micro is in its Q4.
The drawing stacks the cycles slowest first, the order the address reads in. The ribbon itself puts the fastest cycle on top by default, so on the chart the Micro row sits above the 90-minute row and the Daily row, as in the capture below. The address still reads slowest first, left to right, whichever way up the rows are; tick Slowest cycle on top in section 4 to stack the ribbon the drawing’s way.
What each cell prints is the Cell text setting in section 5: nothing, its quarter number, or its address, which is the default. Address depth sets how many cycles the address spans, from 1 to 7, and Address separator prints it as 214, 2-1-4 or 2·1·4.
A 0 in an address means the parent cycle is outside its four quarters, as the Weekly is during the Friday session, and no chain runs across it. A cell too narrow to hold its text is left blank.
When the quarters chain
A chain is three or more neighbouring cycles in the same quarter, read down the ladder; when one forms, its cells light on the ribbon. Neighbouring matters: a Weekly and a Micro in the same quarter, with the cycles between them elsewhere, are not a chain.
One cross-quarter link is allowed: a cycle in its Q4 next to a cycle in its Q1, the Q4 to Q1 bridge, where one cycle ends as the next begins.
Minimum cycles in a chain, in section 3, sets the floor: 3 by default, up to 7. Two aligned cycles are an alignment, not a chain; raise the floor for rarer, deeper chains. Section 2 decides which cycles are detected at all, and all ten are on by default.
Chains on the price chart
Quarter Sequence Chains Pro can shade each open chain over the candles, so the chain sits on price where you read it, not only in the pane below. Shade open chains on the price chart, in section 6, is on by default, and Style chooses how the chain is drawn.
| Style | What it draws |
|---|---|
| Tint (default) | A soft, full-height shade across the chain, the lightest touch |
| Boxes | A bordered box for each step of chain depth |
| Edge lines | A vertical line where the chain opens and where it closes, nothing between |
With Deepen shade with chain depth on, the default, a deeper chain shades more strongly, so a five-cycle chain stands out from a three-cycle one.
Three filters decide what reaches the price chart: which cycles, which quarters and which addresses. By default all ten cycles are ticked but only two quarters, Q2 and Q3, so the chart shades the chains in those two quarters. Show only these addresses takes a list such as 214, 1x1, where x stands for any digit. Tick only the Pico and only Q2 and Q3, and the chart shades only the Pico’s Q2 and Q3 while they sit in a chain. The ribbon itself is never filtered.
The chains still to come
Quarter Sequence Chains Pro draws the quarters and chains still to come, faded, ahead of the current candle: every quarter runs on the clock, so the next chain is known before it opens. Projection horizon, in section 7, sets how far ahead it draws.
| Horizon | How far it draws |
|---|---|
| Auto (default) | The rest of the session on charts under 1 hour; the rest of the week on 1 hour and above |
| Rest of session | To the end of the current session, on any chart |
| Rest of week | To Friday 17:00 New York, on any chart |
| 3 days | Three days ahead, on any chart |
| 7 days | Seven days ahead, on any chart |
Auto keeps an intraday chart clean and lays the week ahead out on an hourly or 4-hour chart. With Include projected chains on in section 6, the default, the chains still to come are shaded on the price chart too. On a fast chart a long horizon draws the slow cycles in full, and the fast ones only as far as the indicator’s drawing budget allows.
Which cycles show on which chart
A cycle shows only on charts where its quarters are long enough for the candles, and section 4 then gives each cycle a window of chart timeframes to show on. These are the default windows:
| Cycle | Shows on charts from |
|---|---|
| Pico | 1 second to 1 minute |
| Nano | 1 second to 1 minute |
| Micro | 1 second to 5 minutes |
| 90-minute | 1 second to 1 hour |
| Daily | 1 second to 4 hours |
| Weekly | 1 second to 6 hours |
| Monthly, Quarterly, Yearly, Quadrennial | 1 second to 1 week |
On a 5-minute chart, then, the Micro, 90-minute, Daily, Weekly and slower rows all show. The Pico needs a 1-minute chart or faster, and prints its text at 15 seconds and below. On the shortest rows the cells can look uneven where a quarter is not a whole number of candles; that is the clock, not an error.
The nine settings sections
Quarter Sequence Chains Pro’s settings come in nine numbered sections, in the order you would set them: what to read first, then how the ribbon looks, then the price chart and the projection. Each section is pictured beside the part of this guide that explains it; the first, Display, is here.
| Section | What it sets |
|---|---|
| 1. Display | The phase scheme: AMDX (standard) or XAMD (shifted) |
| 2. Cycles | Which of the ten cycles are detected; all ten by default |
| 3. Chains | Minimum cycles in a chain: 3 by default, up to 7 |
| 4. Ribbon Pane | Show the ribbon, slowest cycle on top, and each cycle’s chart timeframe window |
| 5. Cell Customization | Cell text, address depth and separator, text size and colour, cell fill, borders and cycle start dividers |
| 6. Price Pane Display | Shading open chains on the price chart: style, depth, and the cycle, quarter and address filters |
| 7. Forward Projection | Whether to project, the horizon, and how faint the projected cells are |
| 8. Quarter Colors | The four quarter colours |
| 9. Cycle Labels | The row labels: on or off, their colour, size and which cycles carry one |
Phase scheme is the one setting that changes the read itself. AMDX, the default, numbers each cycle’s quarters 1, 2, 3, 4 from its open. XAMD shifts the numbering one step later, so the first quarter carries 4 and then 1, 2, 3. The clock boundaries stay where they are, but every number changes, so the chains land at different moments.
Add it to your chart
Quarter Sequence Chains Pro is published on TradingView, so you add it from its script page there. It opens in its own pane beneath price, on the default settings this guide describes, and a 5-minute chart is a good place to start.
Quarter Sequence Chains Pro is one of our TradingView indicators. See our indicators →
Common questions
What is Quarter Sequence Chains Pro?
Quarter Sequence Chains Pro is a TradingView indicator that maps the quarters of ten nested time cycles as a ribbon and lights the chains, the moments when three or more neighbouring cycles sit in the same quarter. It shows time structure only, never price direction.
Does Quarter Sequence Chains Pro repaint?
No. Every quarter comes from the clock, counted from the 18:00 New York trading day, so a cell never changes once it is drawn. The quarters and chains still to come are drawn in advance for the same reason.
Does it tell you which way price will go?
No. It shows which quarter each cycle is in, when several cycles agree and when the next chain is due. Direction comes from the True Opens, never from the chain.
Why can’t I see the Pico row?
The Pico cycle is too short for most charts. It shows on 1-minute charts and below, and its cells print text at 15 seconds and below. Each cycle only appears where its quarters are long enough for the chart’s candles.
Quarter Sequence provides charting tools and indicators, and teaches a framework - not financial advice, signals, or any promise of profit. Trading futures carries substantial risk of loss.